Installation Locate your vehicle's OBDII port. It's usually found on the driver's side under the dashboard. Park outside with a clear view of the sky. The ignition needs to be on for power and location services. Activate your device (if not...
Instructions: Disconnect the unit from the OBD2 port Fully. Then wait a few seconds and firmly reconnect. Continue to turn the vehicle ignition on. (preferably not in a garage or parking structure, so there is a good view of the sky) The position...
The position should then be expected in 20 minutes. Email: [email protected] Submit a Support Request Telephone: 1-877-702-2294 (9:00am - 5:00pm MST)We are a small Canadian team working weekdays 9 AM to 5 PM MST to provide friendly and helpful...
MAT-6560 Charging Instructions Here's what you'll need: MAT-6560 Wireless charging pad AC-DC power adapter Charging Steps: Connect the Power Adapter: Begin by connecting the AC-DC power adapter cable to the wireless charging pad. Plug in the...
MAT-7140: Solar Charging and Battery Life This article explains how to optimize the battery life of your miTrail MAT-7140 tracker using solar charging. Maximizing Solar Charging: Sunlight Exposure: Ensure your MAT-7140 tracker receives direct...
The MVT-1120Leasily plugs into your vehicle's OBDII port. Park outside with a clear view of the sky. The ignition needs to be on in order for the device to have power and generate a position. If your MVT-1120L is not yet activated, please activate...
At miTrail, your safety and the functionality of our devices are our top priorities. To ensure both, we kindly ask users to refrain from modifying their miTrail devices. Modifying the devices can be risky because: Safety: Changes to the device's...
Installation Locate your vehicle's OBDII port. It's usually found on the driver's side under the dashboard. Park outside with a clear view of the sky. The ignition needs to be on for power and location services. Activate your device (if not...
Turning the Device On/Off Power on: Press and hold the power key for 3 seconds (PWR LED turns on). Alternatively, connect the device to a charger (PWR LED turns on automatically). Power off: Press and hold the power key for 2 seconds (PWR LED...
Installation Before you begin: Ensure the device is in an area with good cellular coverage and a clear view of the sky. Turn off the vehicle's ignition. What you'll need: 8-10 mm wrench 3M double-sided adhesive sticker (included) Steps: Locate a...
Installation Before you begin: Choose a mounting location with a clear view of the sky and good signal reception. Avoid metal surfaces or enclosed spaces. What you'll need: Wrench (for power supply connection) Steps: Install Power Supply: Red...
Coming soon!
Coming soon!